Hot dip galvanizing of the strip is carried out by immersing it in a zinc bath maintained at 460 degree centigrade. The chemistry of the bath is carefully controlled to ensure proper adhesion and formability of the applied zinc together with bright blemish free uniform spangles.

The galvanized coils are chromated to improve its resistance to white rust. The chromating parameters are continually monitored and sheets are regularly tested through salt-spray tests to ensure the performance of this process.

Regular Galvanized

material is produced on continuous hot dip galvanizing lines by passing prepared coils through a bath of molten zinc. There are various styles available Minimized Spangle, Minimized Spangle - Extra Smooth. The zinc coatings on these products help resist corrosion due to the barrier protection and sacrificial characteristics of the coating. The required zinc coating thickness for different coating specifications is achieved as the result of passing the hot dipped strip through a variable low pressure, high volume air stream, called an "air knife."

Formability

Lends itself to most fabrication processes; it can be roll-formed, brake-formed, lock-seamed, deep drawn, and stretched. It can be joined by various methods including adhesive bonding, riveting, soldering and welding.

Paintable

Galvanized sheet metal can be readily painted before or after fabrication when the proper pre treatment is performed.

G.I.	Weight per piece (10 corrugation)
Thickness	6ft	7ft	8ft	9ft	10ft	12ft	14ft	15t	16ft
(mm)	1829	2134	2438	2743	3048	3658	4267	4572	4877
0.09	1.21	1.41	1.61	1.81	2.01	2.42	-	-	-
0.10	1.28	1.49	1.71	1.92	2.13	2.56	-	-	-
0.11	1.41	1.64	1.88	2.11	2.35	2.82	-	-	-
0.12	1.54	1.79	2.05	2.30	2.56	3.07	-	-	-
0.13	1.66	1.94	2.22	2.49	2.77	3.33	-	-	-
0.14	1.79	2.09	2.39	2.69	2.98	3.58	-	-	-
0.16	2.05	2.39	2.73	3.07	3.41	4.09	-	-	-
0.18	2.30	2.69	3.07	3.45	3.84	4.60	-	-	-
0.20	2.56	2.98	3.41	3.84	4.26	5.12	5.97	6.39	6.82
0.22	2.81	3.28	3.75	4.22	4.69	5.63	6.56	7.03	7.50
0.25	3.23	3.77	4.31	4.85	5.38	6.46	7.54	8.08	8.61
0.28	3.58	4.18	4.77	5.37	5.97	7.16	8.36	8.95	9.55
0.30	3.88	4.52	5.17	5.81	6.46	7.75	9.04	9.69	10.34
0.32	4.09	4.77	5.46	6.14	6.82	8.19	9.55	10.23	10.91
0.35	4.52	5.28	6.03	6.78	7.54	9.05	10.55	11.31	12.06
0.37	4.73	5.52	6.31	7.10	7.89	9.46	11.04	11.83	12.62
0.40	5.17	6.03	6.89	7.75	8.61	10.34	12.06	12.92	13.78
0.42	5.37	6.27	7.16	8.06	8.95	10.74	12.53	13.43	14.32
0.45	5.81	6.78	7.75	8.72	9.69	11.63	13.57	14.54	15.51
0.47	6.01	7.01	8.01	9.02	10.02	12.02	14.03	15.03	16.03
0.50	6.46	7.54	8.61	9.69	10.77	12.92	15.07	16.15	17.23
0.52	6.65	7.76	8.87	9.98	11.08	13.30	15.52	16.63	17.73
0.55	7.11	8.29	9.48	10.66	11.84	14.21	16.58	17.77	18.95
0.57	7.29	8.51	9.72	10.93	12.15	14.58	17.01	18.22	19.44
0.60	7.75	9.05	10.34	11.63	12.92	15.51	18.09	19.38	20.67
0.63	8.14	9.50	10.85	12.21	13.57	16.28	18.99	20.35	21.71
0.65	8.31	9.70	11.08	12.47	13.85	16.63	19.40	20.78	22.17
0.70	9.04	10.55	12.06	13.57	15.07	18.09	21.10	22.61	24.12
0.75	9.59	11.19	12.79	14.39	15.99	19.18	22.38	23.98	25.58
0.80	10.34	12.06	13.78	15.51	17.23	20.67	24.12	25.84	27.57

4ft GC Sheet Bundled Weight Chart

G.I.	Weight per piece (10 corrugation)
Thickness (mm)	6ft	7ft	8ft	9ft	10ft	12ft	14ft	16ft
0.40	7.67	8.94	10.22	11.50	12.78	15.33	17.89	20.44
0.45	8.62	10.06	11.50	12.94	14.37	17.25	20.12	23.00
0.50	9.58	11.18	12.78	14.37	15.97	19.17	22.36	25.55
0.55	10.54	12.30	14.05	15.81	17.57	21.08	24.60	28.11
0.60	11.50	13.42	15.33	17.25	19.17	23.00	26.83	30.66
0.63	12.07	14.09	16.10	18.11	20.12	24.15	28.17	32.20
0.65	12.46	14.53	16.61	18.69	20.76	24.91	29.07	33.22
0.70	13.42	15.65	17.89	20.12	22.36	26.83	31.30	35.78
0.75	14.37	16.77	19.17	21.56	23.96	28.75	33.54	38.33
0.80	15.33	17.89	20.44	23.00	25.55	30.66	35.78	40.89

Send Enquiry